Secure. Compliant. Safe.

An EN 14470-1 safety cabinet is a fire-resistant storage cabinet designed to safely store flammable liquids in accordance with European standards.

These cabinets are tested to withstand fire exposure for 30, 60, or 90 minutes (Type 30, 60, or 90), helping protect contents and reduce fire escalation inside buildings. Justrite’s EN safety cabinets are test to 90 minutes.

Type 90 indicates that the cabinet provides 90 minutes of fire resistance under EN 14470-1 testing conditions.

During testing, the cabinet must limit internal temperature rise to protect flammable contents for 90 minutes, allowing valuable time for evacuation and emergency response.

EN 14470-1 cabinets meet European fire-resistance standards, while FM Approved cabinets are certified to Factory Mutual performance criteria commonly used in global and US-based facilities.

Both provide compliant flammable storage, but regulatory requirements may differ depending on your country, insurer, or corporate policy.

Under EN 14470-1, Type 90 cabinets must include automatically closing doors that activate in the event of fire.

Some FM Approved cabinets are available in both manual- and self-closing configurations, depending on site risk assessments and operational needs.

The right safety cabinet depends on the type of hazardous material, required fire rating, local regulations, and available space.

Factors such as EN Type 30 vs Type 90 rating, ventilation requirements, chemical compatibility, and storage volume should all be considered before purchasing.

Yes, many safety cabinets can be connected to ventilation systems to help manage vapor accumulation.

However, venting must comply with local regulations and should not compromise the cabinet’s fire-resistance performance.

Flammable and combustible liquids such as solvents, fuels, paints, and certain chemicals can be stored in approved safety cabinets.

Always verify chemical compatibility and regulatory requirements before storage.

Certain chemicals must never be stored together because they can react dangerously if mixed, leaked, or exposed to heat. Incompatible chemicals should always be segregated according to their hazard class and Safety Data Sheet (SDS) guidance.

Common incompatibilities include:

• Flammable liquids and oxidizers (e.g., solvents and hydrogen peroxide)
• Acids and bases (e.g., hydrochloric acid and sodium hydroxide)
• Acids and cyanides or sulfides (can release toxic gases)
• Oxidizing acids and organic materials
• Water-reactive chemicals and aqueous solutions
• Nitric acid and other organic acids or solvents

Even inside a certified safety cabinet (such as EN 14470-1 Type 90 or FM Approved models), incompatible chemicals must be segregated. Fire resistance protects against external heat exposure — it does not prevent dangerous chemical reactions inside the cabinet.

Always review the product’s SDS and follow local regulations when determining storage compatibility. When in doubt, conduct a formal risk assessment or request a professional site survey to ensure compliant chemical segregation.

Safety cabinets help facilities comply with fire codes and hazardous storage regulations while reducing the risk of fire spread and chemical incidents.

Proper storage supports audit readiness, employee safety, and potential insurance requirements.

Safety cabinets do not prevent ignition, but they are designed to reduce fire escalation by containing flammable liquids and limiting heat exposure during a fire.

They are part of a broader fire safety strategy that includes proper handling and storage procedures.

Safety cabinets should be installed in well-ventilated areas away from ignition sources and in accordance with local fire and building regulations.

Placement should also allow safe access and emergency response clearance.

Storage limits depend on cabinet size, local regulations, and fire codes.

Facilities should follow national and site-specific storage quantity limits when determining cabinet capacity.

In Europe, EN 14470-1 certified cabinets — often Type 90 — are commonly required for compliant flammable liquid storage.

The correct rating depends on your facility’s risk profile and regulatory environment.

In many jurisdictions, flammable liquids must be stored in approved fire-resistant cabinets once quantities exceed certain thresholds.

Local regulations and insurance requirements should always be reviewed.

The safest method is to store flammable chemicals in certified fire-resistant safety cabinets that meet applicable standards such as EN 14470-1 or FM.

Proper ventilation, segregation, and labeling should also be implemented.