EPA
Decon QuickBerm® 2857 Justrite
Art. no: 2857
Please share this article with others
Copy this link. After this you can paste and share it.
Product description
Portable decontamination solution with multiple wash-down zones, designed to protect personnel and contain hazardous fluids during emergency response operations
Quickly go to
Vista Geral
Product features
- Estas bermas de múltiplos estágios para utilização de emergência com paredes internas patenteadas criam zonas de lavagem que recolhem e contêm soluções contaminadas em segurança. Selecione entre modelos de duas, três ou quatro zonas
- O tecido revestido de PVC leve proporciona uma ampla faixa de resistência química. As paredes de 20 cm permitem a fácil entrada e saída dos compartimentos. Um encaixe de drenagem GHT de 19 mm por zona
- Peça única - o sistema interno de suporte de parede patenteado forma zonas de lavagem estanques
- Preparação rápida e fácil - não requer nenhuma montagem
- Gradeamento antiderrapante resistente opcional mantêm os colaboradores e peças afastadas de líquidos e contaminantes acima da água contaminada da lavagem
- Secure and Compliant: Ensures a safe wash-down area that meets environmental protection standards.
Product description
Portable multi-zone decon stations help prevent environmental contamination. Single-piece construction—patented inside wall-support system forms watertight wash down zones. Quick and easy setup—no assembly required. For emergency deployment, these multi-stage berms with patented interior walls create wash down zones that safely capture and contain contaminated solutions. Select from two-, three-, or four-zone models. Watertight, lightweight PVC coated fabric provides wide range of chemical resistance. The 8-inch (203-mm) walls allow for easy entry and exit of the compartments. One ¾-in GHT drain fitting per zone. Order optional grates to keep personnel above liquid.
Conformidades
EPA CFR 40
EPA CFR 40
264.175 Containment. (a) Container storage areas must have a containment system that is designed and operated in accordance with paragraph (b) of this section, except as otherwise provided by paragraph (c) of this section. (b) A containment system must be designed and operated as follows: (1) A base must underlie the containers which is free of cracks or gaps and is sufficiently impervious to contain leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2) The base must be sloped or the containment system must be otherwise designed and operated to drain and remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are otherwise protected from contact with accumulated liquids; (3) The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of the largest container, whichever is greater. Containers that do not contain free liquids need not be considered in this determination; (4) Run-on into the containment system must be prevented unless the collection system has sufficient excess capacity in addition to that required in paragraph (b)(3) of this section to contain any run-on which might enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from the sump or collection area in as timely a manner as is necessary to prevent overflow of the collection system. (c) Storage areas that store containers holding only wastes that do not contain free liquids need not have a containment system defined by paragraph (b) of this section, except as provided by paragraph (d) of this section or provided that: (1) The storage area is sloped or is otherwise designed and operated to drain and remove liquid resulting from precipitation, or (2) The containers are elevated or are otherwise protected from contact with accumulated liquid. (d) Storage areas that store containers holding the wastes listed below that do not contain free liquids must have a containment system defined by paragraph (b) of this section: (1) FO20, FO21, FO22, FO23, FO26, and FO27. (2) [Reserved]
Especificações Técnicas
especificações técnicas gerais
| High Hazard Seismic Zone | Não |
|---|---|
| Material Group | PVC |