EPA
Rigid-Lock QuickBerm® 2851 Justrite
Artnr: 2851
Please share this article with others
Copy this link. After this you can paste and share it.
Productbeschrijving
Flexibele en robuuste drive-in opvangbak voor opslag van vaten, IBC's en tanks
Quickly go to
Overzicht
Technische specificaties
- Het PVC gecoate materiaal is geschikt om zware materialen op te slaan op de werkplek, occasioneel in- en uitrijden en voetverkeer
- Chemicaliënbestendig en bestand tegen langdurige blootstelling aan UV -uitermate geschikt voor buitengebruik
- Het gepatenteerde en geïntegreerde Rigid-Lock wandondersteuningssysteem is 30cm hoog en vergrendeld in een hoek van 90° voor veilige en lekvrije opslag
- Constructie uit één deel- het gepatenteerde en geïntegreerde Rigid-Lock wandondersteuningssysteem zorgt voor een volledige vrije werkvloer
- Snel en eenvoudig op te zetten- geen assemblage vereist
- Geïntegreerde gaten voor eenvoudige verankering bij sterke wind. Ankerpennen niet inbegrepen
- Proudly Made in the USA – Assembled to the highest standards for top-quality performance and quick lead times
Productbeschrijving
Ergonomisch ontwerp biedt 100% binnenbermtoegankelijkheid met een onbelemmerde zij-aan-zij vloerruimte voor voertuigbanden, voetverkeer en reiniging. Het gepatenteerde Rigid-Lock wandsteunontwerp beschermt het personeel tegen struikelen en vallen bij het lopen langs de buitenrand. Ingebouwde roestvrijstalen wandsteunen vergrendelen de zijwanden in een 305 mm hoge, 90° verticale positie. De Rigid-Lock QuickBerm® biedt onmiddellijke, veilige implementatie en is zonder zorgen klaar voor morsen.
Documentatie & Downloads
- justrite-2851-rigid-lock-quick-berm-specification-de-126249
- justrite-2851-rigid-lock-quick-berm-specification-english-gb-126250
- justrite-2851-rigid-lock-quick-berm-specification-es-126251
- justrite-2851-rigid-lock-quick-berm-specification-fr-126252
- justrite-2851-rigid-lock-quick-berm-specification-it-126253
- justrite-2851-rigid-lock-quick-berm-specification-nl-126254
- justrite-2851-rigid-lock-quick-berm-specification-pt-126255
- justrite-2850-rigid-lock-quick-berm-xt-flexible-spill-berm-installation-english-gb-96507
- justrite-2850-rigid-lock-quick-berm-xt-flexibele-morsberm-installation-nl-166009
- justrite-2850-rigid-lock-quick-berm-xt-flexible-versch-ttungs-berme-installation-de-166007
- justrite-2850-rigid-lock-quick-berm-xt-berma-de-derrame-flex-vel-installation-pt-166008
Accessoires
FAQ
What is the load capacity for Rigid-Lock QuickBerms?
Our Rigid Lock support has a 10X safety factor for a fully loaded HEMT refueler, which is an 8-wheeled tanker, weighing 120,00lbs fully loaded.
Where can flexible spill containment be used?
Flexible spill containment can be used in many settings, including industrial facilities, manufacturing plants, laboratories, construction sites, transportation, and storage areas. They are particularly useful in areas where spills or leaks are a possibility and where rigid containment structures may be impractical or insufficient.
What types of materials can be contained using flexible spill containment?
Flexible spill containment can be used to contain a wide range of materials, including oils, chemicals, hazardous liquids, fuels, and other substances that pose a risk of environmental contamination.
How do I choose the right QuickBerm for my spill containment needs?
When selecting a QuickBerm, consider factors such as the size and volume of the spill you need to contain, the space available for deployment, the compatibility of the berm material with the spilled substance, and any specific requirements or regulations applicable to your industry or location.
Are Rigid-Lock QuickBerms® reusable?
Rigid-Lock QuickBerms® are designed to be reusable. After containing a spill, they can be cleaned, inspected for damage, and folded or rolled up for storage until needed again.
Compliances
EPA CFR 40
EPA CFR 40
264.175 Containment. (a) Container storage areas must have a containment system that is designed and operated in accordance with paragraph (b) of this section, except as otherwise provided by paragraph (c) of this section. (b) A containment system must be designed and operated as follows: (1) A base must underlie the containers which is free of cracks or gaps and is sufficiently impervious to contain leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2) The base must be sloped or the containment system must be otherwise designed and operated to drain and remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are otherwise protected from contact with accumulated liquids; (3) The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of the largest container, whichever is greater. Containers that do not contain free liquids need not be considered in this determination; (4) Run-on into the containment system must be prevented unless the collection system has sufficient excess capacity in addition to that required in paragraph (b)(3) of this section to contain any run-on which might enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from the sump or collection area in as timely a manner as is necessary to prevent overflow of the collection system. (c) Storage areas that store containers holding only wastes that do not contain free liquids need not have a containment system defined by paragraph (b) of this section, except as provided by paragraph (d) of this section or provided that: (1) The storage area is sloped or is otherwise designed and operated to drain and remove liquid resulting from precipitation, or (2) The containers are elevated or are otherwise protected from contact with accumulated liquid. (d) Storage areas that store containers holding the wastes listed below that do not contain free liquids must have a containment system defined by paragraph (b) of this section: (1) FO20, FO21, FO22, FO23, FO26, and FO27. (2) [Reserved]
Technische Specificaties
Algemene specificaties
| High Hazard Seismic Zone | Nee |
|---|---|
| Material Group | PVC |
| Vezelgewich (g) | 900.000000 |
