EPA
Section droite Make-A-Berm MAB-STR Justrite 5.08cm x 457.2cm
No. d'article: JEN28466YL / 28466
Please share this article with others
Copy this link. After this you can paste and share it.
Description du produit
Section droite Make-A-Berm enduite de PVC, flexible et résistante à l’écrasement
Dimension (cm):
5.08cm x 457.2cm
Quickly go to
Aperçu
Spécifications
- Les parois droites peuvent être assemblées ensemble ou combinées avec des coins pour créer une solution de confinement complète
- Possibilité de facilement couper les parois avec un couteau pour s’adapter à la zone de confinement
- Confine les déversements et les fuites de manière unique autour de l’équipement
- Couleur jaune éclatante durable pour plus de visibilité
- Différentes tailles, idéal pour besoins de confinement de petite ou moyenne taille
- Drive-Over Ready – The Heavy-Duty Make-A-Berm™ variant features aluminum mounting strips for forklift and vehicle traffic.
- Regulatory Compliance – Designed to help facilities meet EPA 40 CFR 264.175 and SPCC spill containment regulations.
Description du produit
Les sections droites Make-A-Berm™ permettent d’installer une zone de confinement des déversements autour des équipements difficiles à déplacer, de zones propices au déversement, ou de zones où les parois de forme standard ne fonctionneront pas. En connectant les pièces droites et les coins les uns aux autres, vous pourrez concevoir la zone de confinement désirée. Le tissu jaune enduit de PVC offre une bonne visibilité adaptée aux zones de circulation ainsi qu’une barrière ultrarésistante pour confiner les huiles, l’essence, les acides et autres liquides. Nos garnitures flexibles en mousse sont résistantes à l’écrasement et retrouvent leurs formes initiales sans être affectées par la circulation de piétons ou l’utilisation de chariots de manutention.
Conformités
EPA CFR 40
EPA CFR 40
264.175 Containment. (a) Container storage areas must have a containment system that is designed and operated in accordance with paragraph (b) of this section, except as otherwise provided by paragraph (c) of this section. (b) A containment system must be designed and operated as follows: (1) A base must underlie the containers which is free of cracks or gaps and is sufficiently impervious to contain leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2) The base must be sloped or the containment system must be otherwise designed and operated to drain and remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are otherwise protected from contact with accumulated liquids; (3) The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of the largest container, whichever is greater. Containers that do not contain free liquids need not be considered in this determination; (4) Run-on into the containment system must be prevented unless the collection system has sufficient excess capacity in addition to that required in paragraph (b)(3) of this section to contain any run-on which might enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from the sump or collection area in as timely a manner as is necessary to prevent overflow of the collection system. (c) Storage areas that store containers holding only wastes that do not contain free liquids need not have a containment system defined by paragraph (b) of this section, except as provided by paragraph (d) of this section or provided that: (1) The storage area is sloped or is otherwise designed and operated to drain and remove liquid resulting from precipitation, or (2) The containers are elevated or are otherwise protected from contact with accumulated liquid. (d) Storage areas that store containers holding the wastes listed below that do not contain free liquids must have a containment system defined by paragraph (b) of this section: (1) FO20, FO21, FO22, FO23, FO26, and FO27. (2) [Reserved]
Spécifications Techniques
Spécifications générales
| Type de fermeture | Manuelle |
|---|---|
| Matériau | PVC |
| High Hazard Seismic Zone | Non |
Dimensions
| Dimension (cm) | 5.08cm x 457.2cm |
|---|
