EPA
Plateau flexible pour mini-barrage 2844 Justrite rétention de fuites
No. d'article: 2844
Please share this article with others
Copy this link. After this you can paste and share it.
Description du produit
Contrôle de déversements compact et portable pour produits chimiques agressifs et dangereux
Quickly go to
Aperçu
Spécifications
- Sûr et fiable pour le nettoyage des pièces sur l’établi et les opérations de transfert de produits pétroliers et d’acides
- Fabriqués avec du tissu robuste enduit de PVC modifié
- Avec supports angulaires rigides et des parois de mousse solides
- Chaque enceinte est équipée d’un raccord de drainage DN25 NPT qui se fixe simplement à un tuyau pour le transfert des fluides
- Facile à plier et à entreposer ; fourni avec une sangle
- Participe à la conformité avec la réglementation de l'EPA concernant le confinement et la prévention des déversements (SPCC)
Description du produit
Contrôle de déversements compact et portable pour produits chimiques agressifs et dangereux. Sûr et fiable pour le nettoyage des pièces de table et les opérations de transfert de fluides impliquant des produits pétroliers et des acides, le plateau Mini-Berm Flex est fabriqué à partir d’un tissu robuste enduit de PVC modifié. Il est doté de supports d’angle rigides et de parois en mousse robustes. Chaque berme est fournie avec un raccord de vidange NPT de 1 po. Il suffit de fixer le tuyau et de transférer les liquides pour l’élimination. Facile à plier et à ranger ; sangle fonctionnelle incluse. Aide à se conformer à l’EPA pour le confinement et la prévention des déversements (SPCC).
Documentation & Téléchargement
- justrite-2844-mini-auffangwanne-flex-tray-specification-de-85678
- justrite-2844-mini-berm-flex-tray-specification-en-85680
- justrite-2844-bandeja-flexible-miniberma-specification-es-85683
- justrite-2844-plateau-flexible-pour-mini-barrage-specification-fr-85685
- justrite-2844-mini-vaschetta-flessibile-per-il-contenimento-specification-it-85686
- justrite-2844-mini-berm-flex-tray-specification-nl-85689
- justrite-2844-tabuleiro-flex-vel-de-minibermas-specification-pt-85691
- justrite-2844--specification-zh-85693
Conformités
EPA CFR 40
EPA CFR 40
264.175 Containment. (a) Container storage areas must have a containment system that is designed and operated in accordance with paragraph (b) of this section, except as otherwise provided by paragraph (c) of this section. (b) A containment system must be designed and operated as follows: (1) A base must underlie the containers which is free of cracks or gaps and is sufficiently impervious to contain leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2) The base must be sloped or the containment system must be otherwise designed and operated to drain and remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are otherwise protected from contact with accumulated liquids; (3) The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of the largest container, whichever is greater. Containers that do not contain free liquids need not be considered in this determination; (4) Run-on into the containment system must be prevented unless the collection system has sufficient excess capacity in addition to that required in paragraph (b)(3) of this section to contain any run-on which might enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from the sump or collection area in as timely a manner as is necessary to prevent overflow of the collection system. (c) Storage areas that store containers holding only wastes that do not contain free liquids need not have a containment system defined by paragraph (b) of this section, except as provided by paragraph (d) of this section or provided that: (1) The storage area is sloped or is otherwise designed and operated to drain and remove liquid resulting from precipitation, or (2) The containers are elevated or are otherwise protected from contact with accumulated liquid. (d) Storage areas that store containers holding the wastes listed below that do not contain free liquids must have a containment system defined by paragraph (b) of this section: (1) FO20, FO21, FO22, FO23, FO26, and FO27. (2) [Reserved]
Spécifications Techniques
Spécifications générales
| High Hazard Seismic Zone | Non |
|---|