EPA
Bassins Pliables 2832 Justrite couchette flexible
No. d'article: 2832
Please share this article with others
Copy this link. After this you can paste and share it.
Description du produit
Confinement de déversements d'urgence économique – Il suffit de déplier, de secouer pour dégager l’anneau de mousse supérieur et de placer sous l'équipement qui fuit
Quickly go to
Aperçu
Spécifications
- Permet de confiner les déversements issus de réservoirs latéraux perforés ou de fûts, de conduits hydrauliques, de tuyau et de machines qui fuient
- Le tissu en vinyle durable est 20% plus épais que celui des autres modèles sur le marché, offrant une meilleure résistance à l'abrasion et adhésion fiable des jointures
- L’anneau de mousse supérieur soulève la paroi de confinement alors que le niveau de fluide s’élève
- La couleur jaune offre une bonne visibilité et facilite l'identification
- Multiple sizes: Available in 20, 66, 100, and 150-gallon capacities.
- Multiple sizes: Available in 20, 66, 100, and 150-gallon capacities.
- Reusable: Can be cleaned and reused after deployment.
Description du produit
Confinement de déversement d'urgence économique : il suffit de déplier, de secouer pour dégager l'anneau de mousse supérieur et de placer sous l'équipement qui fuit. • Se plie de façon compacte et se range facilement. • L'anneau de mousse supérieur soulève la paroi de confinement alors que le niveau de fluide s'élève. Utilisez ces bassins légers et peu encombrants pour confiner les déversements issus de réservoirs latéraux perforés ou de fûts, de conduits hydrauliques, de tuyaux et de machines qui fuient. Le tissu en vinyle durable est 20 % plus épais que celui des autres modèles, offrant une meilleure résistance à l'abrasion et une adhésion fiable des jointures. La couleur jaune offre une bonne visibilité et facilite l'identification. Participe à la conformité avec la réglementation de l'EPA concernant le confinement et la prévention des déversements (SPCC).
Documentation & Téléchargement
- justrite-2832-pop-up-pools-flexible-versch-ttungs-berme-specification-de-119164
- justrite-2832-pop-up-pools-flexible-spill-berm-specification-en-119165
- justrite-2832-piscina-desplegable-brazo-de-derrame-flexible-specification-es-119166
- justrite-2832-bassins-pliables-couchette-flexible-specification-fr-119167
- justrite-2832-piscine-pop-up-berm-flessibile-per-fuoriuscite-specification-it-119168
- justrite-2832-pop-up-pools-flexibele-morsberm-specification-nl-119169
- justrite-2832-piscina-pop-up-berma-de-derrame-flex-vel-specification-pt-119170
Conformités
EPA CFR 40
EPA CFR 40
264.175 Containment. (a) Container storage areas must have a containment system that is designed and operated in accordance with paragraph (b) of this section, except as otherwise provided by paragraph (c) of this section. (b) A containment system must be designed and operated as follows: (1) A base must underlie the containers which is free of cracks or gaps and is sufficiently impervious to contain leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2) The base must be sloped or the containment system must be otherwise designed and operated to drain and remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are otherwise protected from contact with accumulated liquids; (3) The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of the largest container, whichever is greater. Containers that do not contain free liquids need not be considered in this determination; (4) Run-on into the containment system must be prevented unless the collection system has sufficient excess capacity in addition to that required in paragraph (b)(3) of this section to contain any run-on which might enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from the sump or collection area in as timely a manner as is necessary to prevent overflow of the collection system. (c) Storage areas that store containers holding only wastes that do not contain free liquids need not have a containment system defined by paragraph (b) of this section, except as provided by paragraph (d) of this section or provided that: (1) The storage area is sloped or is otherwise designed and operated to drain and remove liquid resulting from precipitation, or (2) The containers are elevated or are otherwise protected from contact with accumulated liquid. (d) Storage areas that store containers holding the wastes listed below that do not contain free liquids must have a containment system defined by paragraph (b) of this section: (1) FO20, FO21, FO22, FO23, FO26, and FO27. (2) [Reserved]
Spécifications Techniques
Spécifications générales
| High Hazard Seismic Zone | Non |
|---|---|
| Matériel | PVC |
| Material Group | PVC |