EPA
Tropfkissen 2846 Justrite
Art. Nr: 2846
Please share this article with others
Copy this link. After this you can paste and share it.
Empfohlene Anwendung
Fangen Sie kleine Öl-Lecks und -tropfen ein, bevor sie den Boden verunreinigen oder unsichere Arbeitsflächen bilden
Quickly go to
Überblick
Eigenschaften
- Aus UV- und chemieresistentem, modifiziertem PVC hergestellt
- Patentierte Konstruktionsmerkmale beinhalten eine beschichtete Stoffabdeckung, um die gröbsten Verschmutzungen einzufangen
- Austauschbare, Öl-Sorbens in einer verschweißten, auslaufsicheren Barriere
- Die für Drive-over-Anwendungen ausgelegten Pads beinhalten Messingtüllen in gegenüberliegenden Ecken zur Verankerung. Verankerungseinsätze nicht enthalten
- Die Pads sind in zwei Größen erhältlich; das erweiterte Modell ist so gewichtet, dass es bei starkem Wind niedrig bleibt. Die Außenhülle ist mit optionalen Nachfüllpackungen für Sorbenzien wiederverwendbar
- Anchoring Grommets: Equipped with brass grommets in opposing corners for secure anchoring (stakes not included).
- Multiple Sizes: Offered in standard and extended models, with the extended model weighted for stability in high winds.
Empfohlene Anwendung
Fangen Sie kleine Öl-Lecks und -tropfen ein, bevor sie den Boden verunreinigen oder unsichere Arbeitsflächen bilden. Leicht, flexibel und tragbar – ideal für die Aufnahme kleiner Öltropfen aus undichten Fahrzeugen, Industriemaschinen, Hydraulikleitungen, Rohren und Fässern. Hergestellt aus UV- und chemikalienbeständigem modifiziertem PVC. Das patentierte Designmerkmal beinhaltet eine beschichtete Netzaußenschicht, um grobe Ablagerungen einzufangen. Diese Tropfpads verfügen über ein austauschbares, nur Öl enthaltendes Sorbens innerhalb einer geschweißten, auslaufsicheren Barriere. Die für Drive-over-Anwendungen ausgelegten Pads beinhalten Messingtüllen in gegenüberliegenden Ecken zur Verankerung. Verankerungseinsätze nicht enthalten. Die Pads sind in zwei Größen erhältlich; das erweiterte Modell ist so gewichtet, dass es bei starkem Wind niedrig bleibt. Die Außenhülle ist mit optionalen Nachfüllpackungen für Sorbenzien wiederverwendbar. Hilft bei der Einhaltung der EPA zur Vermeidung von Verschüttungen (SPCC).
Dokumente zum Downloaden
- justrite-2846-tropfkissen-specification-de-83695
- justrite-2846-drip-pads-specification-en-83698
- justrite-2846-absorbentes-para-fugas-y-goteos-specification-es-83700
- justrite-2846-tapis-d-gouttement-specification-fr-83701
- justrite-2846-tappetini-antigoccia-specification-it-83702
- justrite-2846-absorptietrays-specification-nl-83703
- justrite-2846-remendos-de-gotejamentos-specification-pt-83705
- justrite-2846--specification-zh-83707
Compliances
EPA CFR 40
EPA CFR 40
264.175 Containment. (a) Container storage areas must have a containment system that is designed and operated in accordance with paragraph (b) of this section, except as otherwise provided by paragraph (c) of this section. (b) A containment system must be designed and operated as follows: (1) A base must underlie the containers which is free of cracks or gaps and is sufficiently impervious to contain leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2) The base must be sloped or the containment system must be otherwise designed and operated to drain and remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are otherwise protected from contact with accumulated liquids; (3) The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of the largest container, whichever is greater. Containers that do not contain free liquids need not be considered in this determination; (4) Run-on into the containment system must be prevented unless the collection system has sufficient excess capacity in addition to that required in paragraph (b)(3) of this section to contain any run-on which might enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from the sump or collection area in as timely a manner as is necessary to prevent overflow of the collection system. (c) Storage areas that store containers holding only wastes that do not contain free liquids need not have a containment system defined by paragraph (b) of this section, except as provided by paragraph (d) of this section or provided that: (1) The storage area is sloped or is otherwise designed and operated to drain and remove liquid resulting from precipitation, or (2) The containers are elevated or are otherwise protected from contact with accumulated liquid. (d) Storage areas that store containers holding the wastes listed below that do not contain free liquids must have a containment system defined by paragraph (b) of this section: (1) FO20, FO21, FO22, FO23, FO26, and FO27. (2) [Reserved]
Technische Spezifikationen
Allgemeine Spezifikation
| High Hazard Seismic Zone | Nein |
|---|---|
| Material Group | PVC |