EPA
Make-A-Berm Eckenset MAB-CNR Justrite 14cm x 28cm
Art. Nr: JEN28476YL / 28476
Please share this article with others
Copy this link. After this you can paste and share it.
Empfohlene Anwendung
PVC-beschichtetes, leicht anzubringendes Make-A-Berm Eckenset
Abmessungen (cm):
14cm x 28cm
Quickly go to
Überblick
Eigenschaften
- Eckstücke können mit geraden Stücken kombiniert werden, um eine komplette Auffanglösung zu schaffen
- Verschiedene Größen, ideal für kleine bis mittlere Auffangvolumen
- Langlebige, leuchtend gelbe Farbe für gute Sichtbarkeit
- Hält Verschüttungen und Leckagen in einzigartigen Situationen zurück
- Semi-Permanent or Removable Installation – Secure with polyether-based adhesive for a liquid-tight, semi-permanent seal, yet easily removable if containment needs change.
- Drive-Over Ready – The Heavy-Duty Make-A-Berm™ variant features aluminum mounting strips for forklift and vehicle traffic.
- Regulatory Compliance – Designed to help facilities meet EPA 40 CFR 264.175 and SPCC spill containment regulations.
Empfohlene Anwendung
Das Make-A-Berm™ Eckenset ermöglicht die Installation von Auffangbereichen um schwer zu bewegende Geräte, verschüttungsgefährdete Bereiche oder Bereiche, in denen eine standardförmige Berme nicht funktioniert. Durch das Verbinden der geraden Teile, in Kombination mit den Eckteilen, können Sie die benötigte Auffangfläche gestalten. Das gelbe PVC-beschichtete Gewebe sorgt für gute Sichtbarkeit in Verkehrsbereichen und bietet eine hochresistente Barriere zur Aufnahme von Ölen, Benzin, Säuren und anderen Flüssigkeiten. Die flexiblen Schaumstoffeinlagen sind bruchfest und kehren in ihre ursprüngliche Form zurück, nachdem sie von Fußgängern oder Handwagen benutzt wurden.
Compliances
EPA CFR 40
EPA CFR 40
264.175 Containment. (a) Container storage areas must have a containment system that is designed and operated in accordance with paragraph (b) of this section, except as otherwise provided by paragraph (c) of this section. (b) A containment system must be designed and operated as follows: (1) A base must underlie the containers which is free of cracks or gaps and is sufficiently impervious to contain leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2) The base must be sloped or the containment system must be otherwise designed and operated to drain and remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are otherwise protected from contact with accumulated liquids; (3) The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of the largest container, whichever is greater. Containers that do not contain free liquids need not be considered in this determination; (4) Run-on into the containment system must be prevented unless the collection system has sufficient excess capacity in addition to that required in paragraph (b)(3) of this section to contain any run-on which might enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from the sump or collection area in as timely a manner as is necessary to prevent overflow of the collection system. (c) Storage areas that store containers holding only wastes that do not contain free liquids need not have a containment system defined by paragraph (b) of this section, except as provided by paragraph (d) of this section or provided that: (1) The storage area is sloped or is otherwise designed and operated to drain and remove liquid resulting from precipitation, or (2) The containers are elevated or are otherwise protected from contact with accumulated liquid. (d) Storage areas that store containers holding the wastes listed below that do not contain free liquids must have a containment system defined by paragraph (b) of this section: (1) FO20, FO21, FO22, FO23, FO26, and FO27. (2) [Reserved]
Technische Spezifikationen
Allgemeine Spezifikation
| Material | PVC |
|---|---|
| High Hazard Seismic Zone | Nein |
Abmessung
| Abmessungen (cm) | 14cm x 28cm |
|---|