EPA
Decon QuickBerm® 2857 Justrite
Art. Nr: 2857
Please share this article with others
Copy this link. After this you can paste and share it.
Empfohlene Anwendung
Tragbare Mehrzonen-Dekontaminationsstationen helfen, Umweltverschmutzung zu vermeiden
Quickly go to
Überblick
Eigenschaften
- Für den Notfall schaffen diese mehrstufigen Bermen mit patentierten Innenwänden Abwaschzonen, die kontaminierte Lösungen sicher erfassen und auffangen. Wählen Sie aus zwei-, drei- oder vierzonigen Modellen
- Das leichte PVC-beschichtete Gewebe bietet eine breite Palette an chemischer Beständigkeit. Die 20 cm hohen Wände ermöglichen einen einfachen Ein- und Ausstieg in die Fächer. Eine 19-mm GHT-Ablaufarmatur pro Zone
- Einteiliges, patentiertes, innenliegendes Wandträgersystem bildet wasserdichte Abwaschzonen
- Schnelle und einfache Einrichtung - keine Montage erforderlich
- Optionale langlebige, rutschfeste Roste halten Personal und Teile von Flüssigkeiten und Verunreinigungen über verunreinigtem Abwaschwasser fern
- Secure and Compliant: Ensures a safe wash-down area that meets environmental protection standards.
Empfohlene Anwendung
Bei Notfalleinsätzen gewährleisten diese mehrstufigen Dekon-Wannen mit patentierten Innenwänden Abwaschzonen, die verschmutzte Lösungen sicher auffangen und kontrollieren. Erhältlich in Zwei-, Drei- oder Vier-Zonen-Modellen. Wasserdichtes, leichtgewichtiges Material, das PVC-beschichtet ist, bietet umfassende chemische Beständigkeit. Die 203 mm hohen Wände ermöglichen einfachen Ein- und Ausgang aus den Abteilen. Eine ¾-Zoll GHT-Entleerarmatur pro Zone. Bestellen Sie optionale Gitter um Arbeitskräfte oberhalb des Flüssigkeitsniveaus zu positionieren.
Compliances
EPA CFR 40
EPA CFR 40
264.175 Containment. (a) Container storage areas must have a containment system that is designed and operated in accordance with paragraph (b) of this section, except as otherwise provided by paragraph (c) of this section. (b) A containment system must be designed and operated as follows: (1) A base must underlie the containers which is free of cracks or gaps and is sufficiently impervious to contain leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2) The base must be sloped or the containment system must be otherwise designed and operated to drain and remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are otherwise protected from contact with accumulated liquids; (3) The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of the largest container, whichever is greater. Containers that do not contain free liquids need not be considered in this determination; (4) Run-on into the containment system must be prevented unless the collection system has sufficient excess capacity in addition to that required in paragraph (b)(3) of this section to contain any run-on which might enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from the sump or collection area in as timely a manner as is necessary to prevent overflow of the collection system. (c) Storage areas that store containers holding only wastes that do not contain free liquids need not have a containment system defined by paragraph (b) of this section, except as provided by paragraph (d) of this section or provided that: (1) The storage area is sloped or is otherwise designed and operated to drain and remove liquid resulting from precipitation, or (2) The containers are elevated or are otherwise protected from contact with accumulated liquid. (d) Storage areas that store containers holding the wastes listed below that do not contain free liquids must have a containment system defined by paragraph (b) of this section: (1) FO20, FO21, FO22, FO23, FO26, and FO27. (2) [Reserved]
Technische Spezifikationen
Allgemeine Spezifikation
| High Hazard Seismic Zone | Nein |
|---|---|
| Material Group | PVC |